gallery desc
descdescdescdescdesc

HM&FC- 2″x 32′ Premium Exhaust Heat Wrap Manifold Wrap Titanium Lava Fiber Thermal Heat Wrap + 4 pcs Ties (without shippment)

14.99 $

HM&FC- 2"x 32′ Premium Exhaust Heat Wrap Manifold Wrap Titanium Lava Fiber Thermal Heat Wrap + 4 pcs Ties     Exhaust heat wrap is simply wrapped around exhaust headers or turbos

Buy product

SKU: 32228587174 Category:

Product Description

HM&FC- 2"x 32′ Premium Exhaust Heat Wrap Manifold Wrap Titanium Lava Fiber Thermal Heat Wrap + 4 pcs Ties

 

 

Exhaust heat wrap is simply wrapped around exhaust headers or turbos to retain the heat in the gas.

Thus reducing under-bonnet temperatures and induction temperatures. Cooler air in the engine bay 

gives better performance.

 

 

Hight Temperature Wrap Exhaust Header Wrap 

 

 Wrap specs:

  • thickness: 1/16 inch (1.5mm)
  • width: 2  inch (5cm)
  • length:32ft (10m)
  • temp: 1800°f continuous, 3100°f intermittent
  • colors: Natural
  • Material: Titaunim lava fiber
  • interlocked weave stays together

A couple reasons to consider this upgrade:

  • this wrap will help protect your wallet by increasing efficiency of the everyday vehicle.
  • extends engine life
  • instant fuel savings, higher mpg
  • proven to reduce under hood heat by up to 70%
  • easily installed by the novice and pro alike
  • will reduce turbo lag
  • will increase horsepower
  • protects under hood wiring & electronics
  • keeps the engine compartment cooler, protecting plastic parts, hoses, wiring etc from dry rot and early break down.
  • use as a turbo wrap instead of a 400$ blanket
  • wrap hot hoses supercharger hardware and more 

 

Also a great way to hide bluing, weld lines or just plain ugly pipes on older or custom made pipes

installation:

  • wear gloves and a long sleeve shirt to prevent itching/and irritation.
  • wrap will smoke lightly after initial installation (just few minutes).
  • starting at the flange end leave about ¼"- ½" for hardware.
  • each wrap should overlap the previous layer by approximately ¼"- ½"
  • turns and curves will have bit more of an overlap.
  • try to keep the wrap as snug as possible as you go and continue to the end of the pipe.
  • use a stainless steel tie at both ends to hold wrap in place. ( i use 2 0r 3 at each end for looks, extra security & peace of min

Fitting Tips:

  •  Because the fiber properties, please wear gloves when using, or may irritate the skin itching.
  •  For a tighter fit soak the wrap in water before application. This will allow the wrap to stretch slightly so that it can be applied tighter and more evenly than when it is dry. This will soon dry out once the engine is turned on and the exhaust heats up. Soaking heat wrap will also make the wrap easier to work with.
 

HM&FC turbo blanket (Glass fiber) fit : t4 , gt40, gt42 ,gt55, t67, t66? and most t4 turbine housing turbo charger

US$ 16.00/piece
 

 

HM&FC T3 turbo blanket Titanium fit : t2 , t25 ,t28 , gt28 , gt30 , gt35 (inside and outside both made by Titanium)

US$ 23.00/piece
 

 

HM&FC- 2"x 32′ black fiberglass automobile/motorcycle exhaust heat insulation wrap turbo wrap+4 zip ties (without shippment)

US$ 9.99/piece
 

 

HM&FC- 2”x32′ ALUMINIZED Thermal Wrap,exhaust insulating warp,header warp ,exhaust pipe warp with high quality + 4 zip ties

US$ 23.99/piece
 

 

HM&FC- 2"x 32’EXHAUST HEADER TURBO MANIFOLD HIGH TEMP HEAT WRAP WHITE+4 ZIP TIES

US$ 17.99/piece
 

 

HM&FC- 2"x 50′ Premium Exhaust Heat Wrap Manifold Wrap Titanium Lava Fiber Thermal Heat Wrap + 8 pcs Ties

US$ 29.99/piece
 

 

HM&FC- 2"x 16′ Premium Exhaust Heat Wrap Manifold Wrap Titanium Lava Fiber Thermal Heat Wrap+ 2 pcs Ties

US$ 8.00/piece
 

 

HM&FC- 2"x 16′ black fiberglass automobile/motorcycle exhaust heat insulation wrap turbo wrap+2 zip ties

US$ 5.00/piece
 

 

 

 

Additional Information

Brand Name

HM&FC

Model Name

T-10

Item Width

5 cm

Special Features

for High Temperature

External Testing Certification

ISO9000

Item Length

15 m

Material Type

Titanium Fiberglass

Item Weight

0.6 kg

is_customized

Yes

Reviews

There are no reviews yet.

Be the first to review “HM&FC- 2″x 32′ Premium Exhaust Heat Wrap Manifold Wrap Titanium Lava Fiber Thermal Heat Wrap + 4 pcs Ties (without shippment)”